3d wheel aligner used wheel alignment machine
Specification
Measurement:
1. Toe/Camber/ Caster/S.A.I (or KPI)
2. Thrust Angle/Chassis wheelbase/wheel track/Rolling Radius/Set-Back
Measure Items |
Measurement Accuracy Range |
Measurement Range |
Display Precision |
0.1mm/0.01° |
- |
Toe |
±0.01° |
±40° |
Camber |
±0.01° |
±45° |
Caster |
±0.02° |
±45° |
S.A.I |
±0.02° |
±45° |
Set Back |
±0.01° |
±40° |
Thrust Angle |
±0.01° |
±40° |
Steering Angle |
±0.02° |
±50° |
Track Width |
±2mm |
1219mm-2438mm |
Wheelbase |
±2mm |
2006mm-4572mm |
Product's feature
3D measurement technology ---which based on car body, more precision and stable.
Camera measurement system ---using two camera and work together with four target disk which is a revolutionary measurement method.
Target disk ---there isn't electronic components inner and instead of traditional electronil sensor. It can more efficiently to eliminate the equipment error which caused by circuit.
Calibration ---Only need once RCP calibration after installation, process simple and repeated calibration is unnecessary.
Software system ---Simple operation, measurement can be finished in 2 minutes.
Product Detail
1) Camera
Using 12 million high-definition camera, SONY camera 60 frames per second, the cart completes the measurement within 5 seconds,
the measurement result is efficient and accurate.
2) Clamps
Fast installation, suitable for all rims between 12”-23”
3) Target plate
Apply high strength plastic target,Aluminum alloy, waterproof, anti-corrosion, high temperature prevention, high reflective material, sharper image.
4) Turntable plate
Equipped with a 400MM mechanical engraved turntable plate to facilitate the detection of vehicle parameters; equipped with a turntable plate transition block to facilitate vehicle movement and extend the life of the turntable plate.
5) 32" LCD Displayer
Industrialized large display screen, the display screen is clearer, convenient for wheel alignment.
Accessory
Standard Configuration
Computer host
|
1 Set |
Displayer
|
32-inch |
Camera
|
1 Set/2 pcs |
Pillar
|
1 Set |
Cabinet
|
No cabinet, 1 set keyboard tray |
Camera Beam
|
1 Set |
Clamp/Target
|
1 Set/4pcs |
Turntable
|
1 Set/2pcs |
Hanger
|
1 Set/4pcs |
Mouse/Keyboard
|
1 Set |
Eccentric screw and ground pin
|
1 Set |
Transitional Block
|
1 Set/2pcs |
Steering Wheel & Brake Lock
|
1 Set |
Wedge-shaped Pad
|
1 Set/2pcs |
Printer
|
Optional |
Packing & Delivery
Three packages of the 3d wheel aligner
2800 mm*300 mm*300 mm
2500 mm*300 mm*300 mm
1000 mm*850 mm*850 mm

Customers Feedback
FAQ
1) Warranty Policy and Terms.
-The machine warranty is one year(except man-made damage). and if there is any question about the machine or software, we can offer help by mail, phone call, or online tools like skype, whatsapp etc.
2)Do we need to calibrate for the machine?
-The machine only need one calibration and it finished calibration before leaving the factory, because no periodic calibration needed, you don’t need to calibrate again.
3)How do I get help when I have problems with the aligner?
-Online and/or offline help would be offered to work out and solve your problem